Most IDS VCM2 Issues are due to corrupt firmware, so the steps are as follows to recover your VCM 2.
Shut down the IDS application if it is running.
Disconnect the VCM II DLC cable from the vehicle.
Disconnect the VCM II USB cable from the VCM II and PC.
Remove the rubber boot on the VCM II that is opposite the DLC connector to expose the Recovery Mode Switch.
Start the IDS application.
Press and hold the plastic tab.
Shut down the IDS application if it is running.
Disconnect the VCM II DLC cable from the vehicle.
Disconnect the VCM II USB cable from the VCM II and PC.
Remove the rubber boot on the VCM II that is opposite the DLC connector to expose the Recovery Mode Switch.
Start the IDS application.
Press and hold the plastic tab.
RSS Feed