Telwin Battery Support Unit 120 AMP
|
It's finally here! The new Doctor Charge 130 enhances the Doctor Charge range which has defined an innovative market concept of battery chargers, the BATTERY MANAGER.
Doctor Charge 130 is a multi-functional electronic device which, other than charging and complete maintenance Pulse Tronic of WET, GEL, AGM,MF, PbCa, EFB Li and 6/12/24V,, becomes an indispensable tool in workshops, garages and show rooms in all intervention and diagnostics on vehicles (up to 120A current supplied). Its huge power makes it ideal for new generation vehicles, whose on-board electronics are always more present and increasingly advanced. Let's not forget that Doctor Charge 130, if necessary, can transform into a starter! 
|
|
CHARGE: The right energy for every battery. Automatic current selection, in charging and maintenance, based on the battery capacity |
|
RECOVERY: new life in old batteries
DESULFATION: pulse process to recover sulphated batteries that enables removal of sulphates from the lead plates thus recovering initial capacity EQUALIZATION: specific function for periodic maintenance to restore the optimal status of an AGM or WET battery |
START: guaranteed start-up
Doctor Charge 130 is also a starter: 180A peak power |
SUPPLY: a source of reliable energy
DIAGNOSTIC: stabilised power supply of the vehicle electronics to safeguard the battery during diagnostics SHOW ROOM: source of energy to maintain healthy batteries on test-drive vehicles MEMORY SAVER: maintenance of vehicle electronics in battery changes to avoid various set-up loss |
For total maintenance of WET, GEL, AGM, MF, SPIRAL, START-STOP batteries at 12/24V and for support activities when intervening on vehicles in workshops, repair shops and car dealer premises.
The innovative Power Stream technology guarantees better performance, up to 50% more than traditional battery chargers. The Pulse Tronic technology guarantees optimal battery charging over 8 phases.
Doctor Charge 130 carries out 5 functions: 1. Automatic charge and maintenance of batteries with PULSE TRONIC technology, even in difficult environmental conditions (low temperatures);
2. battery tests such as voltage at terminals, starting capacity (CCA) and operational check of the vehicle alternator;
3. recovery of sulphated or very discharged batteries, and recovery of optimal operation with periodic regeneration;
4. stable power supply source for battery changes (to protect the on-board electronics), for diagnostic activities (operation checks carried out on the vehicles), for keeping the batteries of display vehicles in showrooms operational;
5. vehicles start. (130 amp start current)
Based on the SMPS (Switch Mode Power Supply) Technology.In case of black-outs or repetitive uses Doctor Charge 130 can set itself at the last settings carried out. Many protections available.
Fit with PFC device
Telwin doctor charge 130 120 amp battery support unit
220v 120Amp Telwin Doctor charge battery support unit
Telwin Doctor Charge 50 Battery support unit
Currently out of stock, special order only.
50Amp battery support unit from Tewlin 12v and 24v plus jump start./
Autel DS808 Eu Uk Edition
The all new DS808EU is Autel’s base Pro-Range tool. The DS808EU is the ‘little brother’ of the MaxiSys MS906 and both tools share very similar software, making the DS808EU fabulous value for money. 2 Years updates
Original BMW Icom Next A
Original BMW Icom Next for Genuine dealer level BMW diagnostics. No software is included it is to be used with BMW Aos
Impact Diagnostics test lead set
Impact Diagnostics test lead set, kit comprises of the best test leads from Warwick test supplies.
Autel MS908IM Advanced Key programming tool
The Autel MaxiSYS MS908IM is a highly advanced key programming tool that combines the most powerful IMMO and key programming functions with OE-level diagnostics and advanced service functions in one Android based 10.1-inch touchscreen tablet.
Autel MX808C EU
The all new MX808 TSC is the UK edition Service Tool, that offers high tech service functions at a fraction of the cost. Our service tool supports ABS, SRS, SAS, BMS, DPF, EPB, Oil Service, IMMO and TPMS programming functionality, as well as read and clear diagnostic functions for over 60+ manufacturers.